Astrill Setup Manual:Common Problems and Solutions (Troubleshooting)
WHEN ASTRILL IS CONNECTED BUT CERTAIN SITES ARE NOT ACCESSIBLE.
1) Clear your browser cookies and cache.
2) You can try clearing your flash cache and cookies using this link (make sure to delete all sites and confirm the prompt)- http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
then restart browser and it should work
Switch to any US server and report back if this works out any better for you.
How to select different servers in Astrill application - http://i34.tinypic.com/2hxbl87.jpg
WHEN CONNECTED TO OPENWEB BUT SPEED IS ZERO
Help>>Reset Settings on Astrill Application.
Then Please try this:
1. Open Astrill
2. Settings->OpenWeb Options: CHECK "Set System Proxy"
3. Change port to 8642
4. Restart Astrill
Then try with USA via Korea
OR
Help>Speed Test on Astrill Application.
Use this to find the fastest server for your connection.
IF YOU ARE HAVING TROUBLE CONNECTING USING MOBILE DEVICE
We suggest you to type server IP instead of address and try again.
You can find list of all servers here:
https://members.astrill.com/servers-list.php
Once you pick up a server, to get its IP address type on your PC in console (cmd.exe on Windows/ Terminal on Macintosh):
nslookup xx.astrill.net
This will give you IP address of server, type that on your phone.
Also it is possible that your phone uses a proxy from your ISP, You can try to disable ISP proxy in phone settings.
WHEN TUN/TAP IS NOT WORKING
Please go to Control Panel --> Network and Internet --> Network Connections --> 'Change Adapter Settings' and enable 'Astrill SSL VPN' To do so, right click on 'Astrill SSL VPN' and select 'Enable'
If you can't find 'Astrill SSL VPN' under 'Change Adapter Settings', you would need to do the following.
Log in to Astrill application --> Press and hold the 'CTRL' key on keyboard and click on HELP tab in Astrill application.Then click on 'TAP Hide/Show' option and confirm the Windows prompt to allow changes. 'Astrill SSL VPN' will appear under 'Change Adapter Settings' and you can enable it.
OR IF ABOVE DOES NOT WORK, YOU CAN FOLLOW THESE
1) run cmd.exe as Administrator
2) Call the following commands to disable driver signature enforcement
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit.exe -set TESTSIGNING ON
3) Reboot computer, and during boot press F8, and select "Disable Driver Signature Enforcement"
4) When you boot into Windows, reinstall Astrill.
MAC DOES NOT ALLOW APPLICATIONS WHICH ARE NOT DOWNLOADED FROM APPLE STORE
Please go to System Preferences>> Security and Privacy>> General tab. You will see there 'Allow applications downloaded from:' and select 'Anywhere'. This should fix the problem.